Call 1300 ACTROL
Email this page Print this page Share

Leak Detection

  • Danfoss DGS Series Fixed Leak Detectors-1
  • Danfoss DGS Series Fixed Leak Detectors-2

Danfoss DGS Series Fixed Leak Detectors

The Danfoss Gas Sensor (DGS) is a state of the art fixed gas detector which can detect a wide range of different gases. The sensors can be used on a standalone basis or integrated into refrigeration control systems or building management systems (BMS).

Features:

  • Cost effective detection
  • Stand-alone or integrates into Building Management Systems
  • Quick and easy to install
  • Visual and audible alarm

Specifications:

  • Power Supply: 12/24 V AC/DC ± 20%
  • Power Monitoring: Green LED
  • Visual Alarm: Red LED
  • Audible: Sounder, enabled/disabled
  • Fault Monitoring: Red LED On – Green LED Off
  • Analogue Outputs: 0-5V, 1-5V, 0-10V, 2-10V, 4-20mA
  • Digital Outputs: 1 Relay, 1 Amp/24VDC/120VAC, Selectable Delay: 0,1,5,10min
  • Typical Sensor Life: 5 years
  • Calibration Requirements: Standards generally require annual test or calibration. Semiconductor sensors are non-selective but calibrated to a specific gas

DGS Gas Detectors

Cat.No. Part No. Description Default Gas Enclosure Temp. Range: ºC Sensor Type
351200 080Z2098 DGS Gas Detector R404A/R507 IP41 -20 to 50 Semiconductor
351201 080Z2092 DGS Gas Detector R134a IP41 -20 to 50 Semiconductor
351202 080Z2093 DGS Gas Detector R407A IP41 -20 to 50 Semiconductor
351203 080Z2090 DGS Gas Detector R22 IP41 -20 to 50 Semiconductor
351204 080Z2095 DGS Gas Detector CO2 IP41 -20 to 50 Infrared
351210 080Z2099 DGS Gas Detector R404A IP66 -40 to 50 Semiconductor
351211 080Z2089 DGS Gas Detector R134A IP66 -40 to 50 Semiconductor
351212 080Z2094 DGS Gas Detector R407A IP66 -40 to 50 Semiconductor
351213 080Z2091 DGS Gas Detector R22 IP66 -40 to 50 Semiconductor
351214 080Z2096 DGS Gas Detector CO2 IP66 -40 to 50 Infrared
351215 080Z2097 DGS Gas Detector with 3m Probe CO2 IP66 -40 to 50 Infrared

back to top