{{#renderClientSide}}
{{#renderClientSide__inner}} {{/renderClientSide__inner}}
{{/renderClientSide}}

THE FLAME FREE FITTING YOU HAVE ALL BEEN WAITING FOR

Conex >B< Maxi Pro have extended their range of fully certified refrigeration press fittings in Australia. The SAE Stainless Flare – Brass Nut with a copper washer offers a seamless solution to the flare nut to copper adaption which is required during many AC & refrigeration applications.

The all in one fitting ensures a simple and quick install with the added assurance of a secure and permanent joint. This renowned no flare, no flame system will give you peace of mind post installation.

Nevertheless, it is vital that connection is made correctly to prevent any rotational forces.

  • Make the flare connection prior to pressing the >B< MaxiPro joint. If this is not possible additional care must be taken when installing.
  • Align the centres of both flares and tighten the flares by hand
  • Fully tighten using a spanner and torque wrench to the torque values set out in the table. Do not over tighten.

maxi pro table

Join the press revolution and make your next installation the easiest yet with these new fittings from Conex Banninger. For further technical information speak with one of your local Actrol branches.

 

SHOP >B< MAXIPRO

{{#isMaxUser}}
{{/isMaxUser}} {{#REMOVE_CONTENT_WHEN_RENDERED}} {{/REMOVE_CONTENT_WHEN_RENDERED}}
{{#renderClientSide}}
{{/renderClientSide}}